Hikio Robotics - IOT based Underwater Systems, Applications and Robots
Applications
Underwater ROVs
Store
About Us
Contact
Motor parts are thermally coated in order to make pressure and water tolerant. Based on CNC machined, correctly rated magnets, precision cut stator and balanced high quality rotors. We make the motors adapted for underwater applications completely in-house. 20 cm esc cable is already attached and sealed.
  • Seçenek 1
  • Seçenek 2
Product Description
Motor is attached with already sealed esc cable. There is no extra work needed. Ready to use for underwater applications.

Pressure and water tolerant motor is based on an outrunner brushless motor which uses motor crust as rotor. Highly effective motor can be create large torque with low KV enabling direct drive. Since its thermally coated, It doesn't lead to any cooling problems. Motor is consist of precisely balanced rotor for the best reliability and maximum rpm. Operating voltage range is 7 volt to 12 volt. Motor dimension is 28 mm diameter, 26 mm height.

The bearings are designed for underwater use. As mentioned earlier, cable is already attached and pressure sealed. The life cycle of the thruster will be significantly decreased if operating the thruster out of water. The product is based on brushless motor, which needs to be driven by an ESC. It cannot be directly connected to the battery. The battery specification recommends using 12V, 20A current.
Technical Information
Max current: 27A
Voltage range: 7-12V
Motor size:  ⌀28x26mm
Max Power: 250W @ 12v
KV: 1000 KV
Pole Count: 14
Shaft: 3mm
ESC cable length: 20 cm
Weight: 45grams
Content
Motor with 20 cm esc cable.